3Com 4510G - Ipv6 Multicast VLAN Configuration Task List; Configuring Ipv6 Sub-VLAN-Based Ipv6 Multicast VLAN; Configuration Prerequisites; Configuring Sub-VLAN-Based Ipv6 Multicast VLAN

5-3
z For information about MLD Snooping, router ports, and member ports, refer to MLD Snooping
Configuration in the IP Multicast Volume.
z For information about VLAN tags, refer to VLAN Configuration in the Access Volume.
IPv6 Multicast VLAN Configuration Task List
Complete the following tasks to configure IPv6 multicast VLAN:
Configuration task Remarks
Configuring IPv6 Sub-VLAN-Based IPv6 Multicast VLAN
Configuring User Port Attributes
Configuring Port-Based IPv6
Multicast VLAN
Configuring Multicast VLAN Ports
Required
Use either approach.
If you have configured both sub-VLAN-based IPv6 multicast VLAN and port-based IPv6 multicast
VLAN on a device, the port-based IPv6 multicast VLAN configuration is given preference.
Configuring IPv6 Sub-VLAN-Based IPv6 Multicast VLAN
Configuration Prerequisites
Before configuring sub-VLAN-based IPv6 multicast VLAN, complete the following tasks:
z Create VLANs as required
z Enable MLD Snooping in the VLAN to be configured as an IPv6 multicast VLAN
Configuring Sub-VLAN-Based IPv6 Multicast VLAN
In this approach, you configure a VLAN as an IPv6 multicast VLAN, and configure user VLANs as
sub-VLANs of the IPv6 multicast VLAN.
Follow these steps to configure sub-VLAN-based IPv6 multicast VLAN:
To do… Use the command… Remarks
Enter system view system-view —
Configure the specified VLAN
as an IPv6 multicast VLAN and
enter IPv6 multicast VLAN view
multicast-vlan ipv6 vlan-id
Required
No IPv6 multicast VLAN
configured by default