10-14
<ProviderA> system-view
z Configuration on GigabitEthernet 1/0/1
# Configure the port as a hybrid port permitting frames of VLAN 1000, VLAN 2000, and VLAN 3000 to
pass through with the outer VLAN tag removed.
[ProviderA] interface gigabitethernet 1/0/1
[ProviderA-GigabitEthernet1/0/1] port link-type hybrid
[ProviderA-GigabitEthernet1/0/1] port hybrid vlan 1000 2000 3000 untagged
# Configure VLAN 3000 as the default VLAN of GigabitEthernet 1/0/1, and enable basic QinQ on
GigabitEthernet 1/0/1. As a result, the frames received on the port are tagged with the outer VLAN tag
3000.
[ProviderA-GigabitEthernet1/0/1] port hybrid pvid vlan 3000
[ProviderA-GigabitEthernet1/0/1] qinq enable
[ProviderA-GigabitEthernet1/0/1] quit
# Create a class A10 to match frames of VLAN 10 of Customer A.
[ProviderA] traffic classifier A10
[ProviderA-classifier-A10] if-match customer-vlan-id 10
[ProviderA-classifier-A10] quit
# Create a traffic behavior P1000 and configure the action of tagging frames with the outer VLAN tag
1000 for the traffic behavior.
[ProviderA] traffic behavior P1000
[ProviderA-behavior-P1000] nest top-most vlan-id 1000
[ProviderA-behavior-P1000] quit
# Create a class A20 to match frames of VLAN 20 of Customer A.
[ProviderA] traffic classifier A20
[ProviderA-classifier-A20] if-match customer-vlan-id 20
[ProviderA-classifier-A20] quit
# Create a traffic behavior P2000 and configure the action of tagging frames with the outer VLAN tag
2000 for the traffic behavior.
[ProviderA] traffic behavior P2000
[ProviderA-behavior-P2000] nest top-most vlan-id 2000
[ProviderA-behavior-P2000] quit
# Create a QoS policy qinq. Associate the class A10 with the traffic behavior P1000, and associate the
class A20 with the traffic behavior P2000 in the QoS policy qinq.
[ProviderA] qos policy qinq
[ProviderA-qospolicy-qinq] classifier A10 behavior P1000
[ProviderA-qospolicy-qinq] classifier A20 behavior P2000
[ProviderA-qospolicy-qinq] quit
# Apply the QoS policy qinq in the inbound direction of GigabitEthernet 1/0/1.
[ProviderA] interface GigabitEthernet 1/0/1
[ProviderA-GigabitEthernet1/0/1] qos apply policy qinq inbound
z Configuration on GigabitEthernet 1/0/2
# Configure VLAN 1000 as the default VLAN.
[ProviderA] interface gigabitethernet 1/0/2
To Next Page
Loading...
