1-40
Figure 1-10 Add an access device
# Add a user for device management
Log into the iMC management platform, select the User tab, and select Access User View > Device
Mgmt User from the navigation tree to enter the Device Management User page. Then, click Add to
enter the Add Device Management User window and perform the following configurations:
z Add a user named hello@bbb and specify the password
z Select SSH as the service type
z Specify the IP address range of the hosts to be managed as 192.168.1.0 to 192.168.1.255, and
click Add to finish the operation
To Next Page
Loading...
