3Com 4510G - Page 771

2-5
# Enable flush message receiving on GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 separately.
[DeviceD] interface gigabitethernet 1/0/1
[DeviceD-GigabitEthernet1/0/1] smart-link flush enable
[DeviceD-GigabitEthernet1/0/1] quit
[DeviceD] interface gigabitethernet 1/0/2
[DeviceD-GigabitEthernet1/0/2] smart-link flush enable