EasyManua.ls Logo

3Com 4510G - Page 820

3Com 4510G
1166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-15
Neighbor aged time : 11
Interface GigabitEthernet1/0/51
DLDP port state : advertisement
DLDP link state : up
The neighbor number of the port is 1.
Neighbor mac address : 0000-0000-0102
Neighbor port index : 59
Neighbor state : two way
Neighbor aged time : 11
The output information indicates that both GigabitEthernet 1/0/50 and GigabitEthernet 1/0/51 are in
Advertisement state and the links are up, which means unidirectional links are not detected and the
two ports are restored.
Troubleshooting
Symptom:
Two DLDP-enabled devices, Device A and Device B, are connected through two fiber pairs, in which
two fibers are cross-connected. The unidirectional links cannot be detected; all the four ports involved
are in Advertisement state.
Analysis:
The problem can be caused by the following.
z The intervals for sending Advertisement packets on Device A and Device B are not the same.
z DLDP authentication modes/passwords on Device A and Device B are not the same.
Solution:
Make sure the interval for sending Advertisement packets, the authentication mode, and the password
on Device A and Device B are the same.

Table of Contents

Related product manuals