142
A
PPENDIX
E: E
XAMPLE
C
ONFIGURATIONS
subnet for your management station – here we will
change it to
192.168.1.200.
b
Refer to the user guide for your operating system on
changing the IP address of your management station.
Be sure to specify a static address as given above, with a
subnet mask of
255.255.255.0.
No other settings will
need to be modified.
c
Reboot the management station if required.
4
From the management PC, launch your web browser
(Netscape 4 or Internet Explorer 4 or above) and log in as
the administrator.
a
Enter
http://192.168.1.254
to load the password
authentication screen of the Internet Firewall 25.
b
In the
User Name
box, type
admin
.
c
In the
Password
box, type the default password
password
. Passwords are case-sensitive.
d
Click
Logi
n.
5
When you have logged in successfully, the main screen of
the management interface for the Internet Firewall 25 is
displayed. From here, configure the unit.
a
Click
Set Passwor
d.
b
In the
Old Password
box, type
password
and then type
the new password twice. Passwords are case sensitive,
and you cannot recover a lost password from the
Internet Firewall.
c
Click
Updat
e. The Home screen is displayed again. If the
status bar at the bottom of the screen does not show
that the password was changed successfully, repeat this
step.
6
Set the date and time.
The Internet Firewall 25 relies on this for logs, reports, and
updates to the content filter list.
a
Click
Set Date & Time
on the Home screen.
b
Select your time zone from the drop down list at the top
of the screen. If you can’t find your city, use one with
the correct offset from GMT (all are covered).
To Next Page
Loading...