3D Systems CubePro - Page 51

473D Systems, Inc.
Shell Options
A
Top Surface Layers
Increase the value for a thicker top
surface layer.
B
Bottom Surface Layers
Increase the value for a thicker
bottom surface layer.
C
Outer Walls
Increase the value for increased
strength of the outer walls.
C
B
A
Support Borders
Support borders (A) reinforce supports (B) for overhanging parts and
should not be used for holes and cavities (C).
Draw Fine Features
Select enable for small parts with ne features. For larger parts needing more accuracy, this feature should not be enabled.
A
B
C