ABB A145-M65 - Installing the Gas Outlet Casing; Fig. 54: Installing the Gas Outlet Casing; Table 45: Tightening Torque (51009)

Operation Manual / 4 Product description / A130-M.. - A145-M..
8 Dismantling and fitting / 8.19 Installing the gas outlet casing
© Copyright 2017 ABB. All rights reserved. HZTL4031_EN Revision F August 2017
8.19 Installing the gas outlet casing
Fig.54: Installing the gas outlet casing
Part number A130 A135 A140 A145
51009 M8
20Nm
M10
40Nm
M12
65Nm
M12
65Nm
Table45: Tightening torque (51009)
1. Insert a new gasket (61002) into the gas outlet casing (61001).
2. Coat the threads of the studs(51008) with high-temperature grease.
3. Attach the lifting gear to the gas outlet casing (61001) and position the gas outlet casing
in the correct position on the turbine casing (51000).
4. If present: Fit the support (61301).
5. Fit the hexagon nuts(51009). Observe the tightening torque.
Page 96 / 111