Installation checklist
Contents of this chapter
This chapter contains a checklist for the mechanical and electrical installation of
the drive.
Checklist
Examine the mechanical and electrical installation of the drive before start-up. Go
through the checklist together with another person.
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or death,
or damage to the equipment can occur. If you are not a qualified electrical
professional, do not do installation, commissioning or maintenance work.
WARNING!
Stop the drive and do the steps in section Electrical safety
precautions (page 18) before you start the work.
Make sure that …
The ambient operating conditions meet the drive ambient conditions specification
and enclosure rating (IP code).
The supply voltage matches the nominal input voltage of the drive. See the type
designation label.
8
Installation checklist 119
To Next Page
Loading...
