￭
Software information label
1
2
3
ACH480-04-09A5-4
3~ 400/480 V (Frame R1)
Pld: 4 kW (5 hp)
S/N: 42050A0024
SW v2.12.0.0
Drive type1
Frame size and ratings2
Serial number and drive software version3
Type designation key
The type designation key shows the specifications and the configuration of the
drive.
￭
Basic code
Type code example: ACH480-04-12A7-4
DescriptionCode
Product seriesACH480
Construction. 04 = Module04
When no options are selected: cabinet optimized module, IP20 (UL open type),
ACH-AP-H assistant control panel, RIIO-01 I/O & EIA-485 module (BACnet MS/TP,
Modbus RTU, N2), EMC category C2 filter, Safe torque off, brake chopper, coated
boards, quick installation and start-up guide.
Size. See the ratings table in the technical data.12A7
Input voltage.4
• 1 = 1-phase 200 … 240 V AC
• 2 = 3-phase 200 … 240 V AC
• 4 = 3-phase 380 … 480 V AC
￭
Option codes
DescriptionCode
No control panel0J400
ACH-AP-H control panel (included as standard)J400
Blank control panel cover (no control panel)J424
ACH-AP-W control panel with Bluetooth interfaceJ429
36 Operation principle and hardware description
To Next Page
Loading...
