Control panel options
The drive supports these control panels:
• ACH-AP-H assistant hand-off-auto control panel
• ACH-AP-W assistant hand-off-auto control panel with Bluetooth
• RDUM-01 blank panel with RJ-45 connector
• CDPI-02 panel bus adapter (blank panel with two RJ-45 connectors for the
panel bus).
In addition, you can order a control panel platform for cabinet door installation.
These panel platforms are available:
DescriptionType
Control panel mounting platform (flush mounting) and cable
1)
DPMP-01
Control panel mounting platform (surface mounting) and cable
1)
DPMP-02
DPMP-02 panel mounting platform (and cable) and RDUM-01 blank panel with
RJ-45 connector
DPMP-EXT2
1)
You need also RDUM-01 blank panel, or CDPI-02 panel bus adapter to connect the panel cable at the
drive end.
UL Type 1 kits
There are UL Type 1 kit options available for the drive. For the ordering codes and
installation instructions, refer to the table that follows.
Installation instructionsOption codeFrame size
UL Type 1 kit for ACS380, ACS480 and
ACH480 installation guide, frames R0 to R2
(3AXD50000235254)
3AXD50000187034R0
3AXD50000176779R1
3AXD50000178780R2
UL Type 1 kit for ACS380, ACS480 and
ACH480 installation guide, frames R3 to R4
(3AXD50000242375)
3AXD50000179220R3
3AXD50000179336R4
34 Operation principle and hardware description
To Next Page
Loading...
