ABB ACH480 - Terms and abbreviations

Terms and abbreviations
DescriptionTerm
Assistant control panel with Hand-Off-Auto functionalityACH-AP-H
Assistant control panel with Hand-Off-Auto functionality and
Bluetooth interface
ACH-AP-W
Optional auxiliary power extension moduleBAPO
Optional USB to RJ45 cableBCBL-01
Optional I/O extension module. Can be installed to the drive together
with a fieldbus adapter module.
BIO-01
Conducts the surplus energy from the intermediate circuit of the
drive to the brake resistor when necessary. The chopper operates
when the DC link voltage exceeds a certain maximum limit. The
voltage rise is typically caused by deceleration (braking) of a high
inertia motor.
Brake chopper
Dissipates the drive surplus braking energy conducted by the brake
chopper to heat
Brake resistor
Optional relay output extension moduleBREL
The capacitors connected to the DC linkCapacitor bank
Configuration adapterCCA-01
Communication adapter moduleCDPI-01
The part in which the control program runs.Control unit
DC circuit between rectifier and inverterDC link
Energy storage which stabilizes the intermediate circuit DC voltageDC link capacitors
Frequency converter for controlling AC motorsDrive
Embedded fieldbusEFB
Electromagnetic compatibilityEMC
Fieldbus adapterFBA
BACnet/IP adapter moduleFBIP-21
Optional CANopen® adapter moduleFCAN
Optional ControlNet™ adapter moduleFCNA-01
Optional DeviceNet™ adapter moduleFDNA-01
Optional EtherCAT® adapter moduleFECA-01
Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP
and PROFINET IO protocols, 2-port
FENA-21
Optional Ethernet POWERLINK adapter moduleFEPL-02
Optional Ethernet adapter module for Modbus TCP protocolFMBT-21
Optional PROFIBUS DP® adapter moduleFPBA-01
Optional PROFINET IO adapter moduleFPNO-21
Physical size of the drive or power moduleFrame, frame size
Optional RS-485 (Modbus/RTU) adapterFSCA-01
Insulated gate bipolar transistorIGBT
DC circuit between rectifier and inverterIntermediate circuit
26 Introduction to the manual