112 Parameters
31.30 Overspeed trip
margin
Defines, together with 30.11 Minimum speed and 30.12
Maximum speed, the maximum allowed speed of the motor
(overspeed protection). If the speed feedback exceeds the
speed limit defined by parameter 30.11 or 30.12 by more than
the value of this parameter, the drive trips on the 7310
Overspeed fault.
WARNING! This function only supervises the speed in
vector motor control mode. The function is not
effective in scalar motor control mode.
Example: If the maximum speed is 1420 rpm and speed trip
margin is 300 rpm, the drive trips at 1720 rpm.
500.00 rpm
0.00…10000.00
rpm
Overspeed trip margin. 1 = 1
No. Name/Value Description Def/FbEq16
Speed feedback
Time
30.12
30.11
31.30
Overspeed trip level
Overspeed trip level
31.30
0
ACQ80 FW.book Page 112 Thursday, February 14, 2019 11:33 AM
To Next Page
Loading...
