Parameters 73
05.22 Diagnostic word 3 Diagnostic word 3. For possible causes and remedies, see
chapter Fault tracing.
0b0000
0b0000...0b1111 Diagnostic word 3. 1 = 1
05.80 Motor speed at fault Displays the motor speed (01.01) at which fault occurred. -
-30000.00…
30000.00 rpm
Motor speed at fault. See par.
46.01
05.81 Output frequency at
fault
Displays the output frequency (01.06) at which fault occurred. -
-500.00…500.00
Hz
Output frequency at fault. See par.
46.02
05.82 DC voltage at fault Displays the DC link volt age (01.11) at which fault occurred. -
0.00…2000.00 V DC voltage at fault. 10 = 1 V
05.83 Motor current at
fault
Displays the motor current (01.07) at which fault occurred. -
05.84 Motor torque at fault Displays the motor torque (01.10) at which fault occurred -
-1600.0…1600.0% Motor torque at fault. See par.
46.03
05.85 Main status word at
fault
Displays the main status word (06.11) at which fault occurred.
For the bit list, see parameter 06.11 Main status word.
0x0000
0x0000...0xffff Main status word at fault. 1 = 1
No. Name/Value Description Def/FbEq16
Bit Name Value
0...8 Reserved
yes
= Main circuit power is on.
9kWh pulse
yes
= kWh pulse is active.
10 Reserved.
11 Fan command.
yes
= Panel port communication lost.
12...15 Reserved
Bit Name
0 Ready to switch ON
1 Ready run
2 Ready ref
3 Tripped
4 Not in use
5 Not in use
6 Not in use
7 Warning
8 Modulating
9 Remote
10 Net OK
11 User bit 0
12 User bit 1
13 User bit 2
14 Charging
15 User bit 3
ACQ80 FW.book Page 73 Thursday, February 14, 2019 11:33 AM
To Next Page
Loading...
