ABB ACS560 - Page 317

Parameters 317
45.10 Total saved CO2 Reduction in CO
2
emissions in metric tons compared to
direct-on-line motor connection. This value is calculated by
multiplying the saved energy in MWh by the value of
parameter 45.18 CO2 conversion factor (by default, 0.5
metric tons/MWh).
This parameter is read-only (see parameter 45.21 Energy
calculations reset).
0.0
0.0…214748300.8
metric tons
Reduction in CO
2
emissions in metric tons. 1 = 1 metric
ton
45.11 Energy optimizer Enables/disables the energy optimization function. The
function optimizes the motor flux so that total energy
consumption and motor noise level are reduced when the
drive operates below the nominal load. The total efficiency
(motor and drive) can be improved by 1…20% depending on
load torque and speed.
Disable
Disable Energy optimization disabled. 0
Enable Energy optimization enabled. 1
45.12 Energy tariff 1 Defines energy tariff 1 (price of energy per kWh). Depending
on the setting of parameter 45.14 Tariff selection, either this
value or 45.13 Energy tariff 2 is used for reference when
monetary savings are calculated.
Note: Tariffs are read only at the instant of selection, and are
not applied retroactively.
5.000 INR
0.000…
4294966.296 units
Energy tariff 1. -
45.13 Energy tariff 2 Defines energy tariff 2 (price of energy per kWh).
See parameter 45.12 Energy tariff 1.
6.000 INR
0.000…
4294966.296 units
Energy tariff 2. -
45.14 Tariff selection Selects (or defines a source that selects) which pre-defined
energy tariff is used.
0 = 45.12 Energy tariff 1
1 = 45.13 Energy tariff 2
Energy tariff
1
Energy tariff 1 0. 0
Energy tariff 2 1. 1
DI1 Digital input DI1 (10.02 DI delayed status, bit 0). 2
DI2 Digital input DI2 (10.02 DI delayed status, bit 1). 3
DI3 Digital input DI3 (10.02 DI delayed status, bit 2). 4
DI4 Digital input DI4 (10.02 DI delayed status, bit 3). 5
DI5 Digital input DI5 (10.02 DI delayed status, bit 4). 6
DI6 Digital input DI6 (10.02 DI delayed status, bit 5). 7
Other [bit] Source selection (see Terms and abbreviations on page 162). -
45.17 Tariff currency unit Selects the currency unit based on which the values of
parameters 45.05, 45.06, 45.07,
45.12, 45.13 are displayed.
INR
INR Displays the values of parameters 45.05, 45.06, 45.07, 45.12,
45.13 in Indian rupee.
100
EUR Displays the values of parameters 45.05, 45.06, 45.07, 45.12,
45.13 in euro.
101
USD Displays the values of parameters 45.05, 45.06, 45.07, 45.12,
45.13 in US dollars.
102
No. Name/Value Description Def/FbEq16