ABB ACS860 - Page 123

Parameters 123
Speed ref ramp in 23.01 Speed ref ramp input (page 157). 10
Speed ref ramped 23.02 Speed ref ramp output (page 157). 11
Speed ref used 24.01 Used speed reference (page 162). 12
Torq ref used 26.02 Torque reference used (page 178). 13
Freq ref used 28.02 Frequency ref ramp output (page 186). 14
Other Source selection (see Terms and abbreviations on page 92). -
11.58 Freq out 1 src min Defines the real value of the signal (selected by parameter
11.55 Freq out 1 source and shown by parameter 11.54 Freq
out 1 actual value) that corresponds to the minimum value of
frequency output 1 (defined by parameter 11.60 Freq out 1 at
src min).
0.000
-32768.000 …
32767.000
Real signal value corresponding to minimum value of
frequency output 1.
1 = 1
11.59 Freq out 1 src max Defines the real value of the signal (selected by parameter
11.55 Freq out 1 source and shown by parameter 11.54 Freq
out 1 actual value) that corresponds to the maximum value of
frequency output 1 (defined by parameter 11.61 Freq out 1 at
src max). See parameter 11.58 Freq out 1 src min.
1500.000;
1800.000
(95.20 b0)
-32768.000 …
32767.000
Real signal value corresponding to maximum value of
frequency output 1.
1 = 1
11.60 Freq out 1 at src
min
Defines the minimum value of frequency output 1. See
diagrams at parameter 11.58 Freq out 1 src min
.
0 Hz
0…16000 Hz Minimum value of frequency output 1. 1 = 1 Hz
No. Name/Value Description Def/FbEq16
11.61
11.60
11.59 11.58
11.5911.58
11.61
11.60
Signal (real)
selected by
par. 11.55
Signal (real)
selected by
par. 11.55
f
out
(11.54)
f
out
(11.54)