ABB ACS860 - Page 196

196 Parameters
30.12 Maximum speed Defines the maximum allowed speed.
WARNING! This value must not be lower than 30.11
Minimum speed.
WARNING! In frequency control mode, this limit is not
effective. Make sure the frequency limits (30.13 and
30.14) are set appropriately if frequency control is
used.
WARNING! In a master/follower configuration, do not
set maximum and minimum speed limits with the same
sign on a follower drive. See section Master/follower
functionality (page 30).
1500.00 rpm;
1800.00 rpm
(95.20 b0)
-6000.00 …
6000.00 rpm
Maximum speed. See par.
46.01
30.13 Minimum frequency Defines the minimum allowed frequency.
WARNING! This value must not be higher than 30.14
Maximum frequency.
WARNING! This limit is effective in frequency control
mode only.
-50.00 Hz;
-60.00 Hz
(95.20 b0)
-100.00 … 100.00
Hz
Minimum frequency. See par.
46.02
30.14 Maximum
frequency
Defines the maximum allowed frequency.
WARNING! This value must not be lower than 30.13
Minimum frequency.
WARNING! This limit is effective in frequency control
mode only.
50.00 Hz;
60.00 Hz
(95.20 b0)
-100.00 … 100.00
Hz
Maximum frequency. See par.
46.02
30.17 Maximum current Defines the maximum allowed motor current. 0.00 A
0.00 … 30000.00 A Maximum motor current. 1 = 1 A
No. Name/Value Description Def/FbEq16