7
Electrical installation – North
America
Contents of this chapter
This chapter gives instructions on wiring the drive.
Safety
WARNING!
If you are not a qualified electrical professional, do not do installation or
maintenance work. Obey the safety instructions of the drive. If you ignore them,
injury or death, or damage to the equipment can occur.
Required tools
To do the electrical installation, you need the these tools:
• wire stripper
• screwdriver set (Torx, flat and/or Phillips, as appropriate)
• torque wrench.
Measuring the insulation
Measuring the insulation is typically not required in North American installations. If
measuring is needed, see the instructions in chapter Measuring the insulation (page 90).
Electrical installation – North America 117
To Next Page
Loading...
