Applicable standards
The drive complies with the following standards. The compliance with the European Low Voltage
Directive is verified according to standard EN 61800-5-1.
Adjustable speed electrical power drive systems. Part 5-1: Safety require-
ments – Electrical, thermal and energy
EN 61800-5-1:2007
Adjustable speed electrical power drive systems. Part 5-2: Safety require-
ments – Functional
IEC 61800-5-2:2016
EN 61800-5-2:2007
Functional safety of electrical/electronic/programmable electronic safety-
related systems - Part 1: General requirements
IEC 61508-1:2010
Functional safety of electrical/electronic/programmable electronic safety-
related systems - Part 2: Requirements for electrical/electronic/program-
mable electronic safety-related systems
IEC 61508-2:2010
Safety of machinery. Functional safety of safety-related electrical, elec-
tronic and programmable electronic control systems
EN 62061:2005
+AC:2010 +A1:2013 +
A2:2015
Safety of machinery — Safety-related parts of control systems — Part
1: General principles for design
EN/ISO 13849-1:2015
Safety of machinery — Safety-related parts of control systems — Part
2: Validation
EN/ISO 13849-2:2012
Semiconductor converters – General requirements and line commutated
converters – Part 1-1: Specification of basic requirements
IEC 60146-1-1:2009
EN 60146-1-1:2010
Safety of machinery. Electrical equipment of machines. Part 1: General
requirements.
EN 60204-1:2006 + A1
2009 + AC:2010
Provisions for compliance: The final assembler of the machine is respons-
ible for installing:
• emergency-stop device
• supply disconnecting device
Degrees of protection provided by enclosures (IP code)
EN 60529:1991 +
A2:2013
Insulation coordination for equipment within low-voltage systems. Part
1: Principles, requirements and tests
IEC 60664-1:2007
Adjustable speed electrical power drive systems. Part 3: EMC require-
ments and specific test methods
EN 61800-3:2004 +
A1:2012
Technical documentation for the assessment of electrical and electronic
products with respect to the restriction of hazardous substances
EN 50581:2012
Technical documentation for the assessment of electrical and electronic
products with respect to the restriction of hazardous substances
IEC/EN 63000:2018
Standard for Safety, Adjustable Speed Electrical Power Drive Systems
– Part 5-1: Safety Requirements – Electrical, Thermal and Energy
UL 61800-5-1: First
Edition
Frames R1…R8
Adjustable speed drives
CSA C22.2 No. 274-17
Standard for Safety, Power Conversion Equipment, third edition
UL 508C:2002
Frame R9
General Requirements - Canadian Electrical Code, Part II
CSA C22.2 No. 22-10
236 Technical data
To Next Page
Loading...
