Markings
These markings are attached to the drive:
CE mark
Product complies with the applicable European Union legislation. For fulfilling the EMC
requirements, see the additional information concerning the drive EMC compliance
(IEC/EN 61800-3).
TÜV Safety Approved mark (functional safety)
Product contains Safe Torque Off and possibly other (optional) safety functions which
are certified by TÜV according to the relevant functional safety standards. Applicable
to drives and inverters; not applicable to supply, brake or DC/DC converter units or
modules.
UL Listed mark for USA and Canada
Product has been tested and evaluated against the relevant North American standards
by the Underwriters Laboratories. Valid with rated voltages up to 600 V.
CSA certification mark for USA and Canada
Product has been tested and evaluated against the relevant North American standards
by the CSA Group. Valid with rated voltages up to 600 V.
EAC (Eurasian Conformity) mark
Product complies with the technical regulations of the Eurasian Customs Union. EAC
mark is required in Russia, Belarus and Kazakhstan.
KC mark
Product complies with Korea’s product safety requirements for electrical and electronic
equipment and components that utilize power from 50…1000 V AC.
Electronic Information Products (EIP) green mark
The product complies with the People’s Republic of China Electronic Industry Standard
(SJ/T 11364-2014). The product does not contain toxic and hazardous substances or
elements above the maximum concentration values, and it is an environmentally-friendly
product which can be recycled.
WEEE mark
At the end of life the product should enter the recycling system at an appropriate col-
lection point and not placed in the normal waste stream.
Technical data 237
To Next Page
Loading...
