With packing max. 100
m/s
2
(330 ft/s
2
), 11 ms
R1…R5 (ISTA 1A):
Drop, 6 faces, 3 edges
and 1 corner
Not allowedShock/Drop (ISTA)
in.mmWeight
range
29.97600…10 kg
(0…22 lb)
24.061010…19 kg
(22…42 lb)
18.146019…28 kg
(42…62 lb)
13.434028…41 kg
(62…90 lb)
R6…R9 (ISTA 3E):
Shock, incline impact:
1.2 m/s (3.94 ft/s)
Shock, rotational edge
drop: 230 mm (7.9 in)
1. For neutral-grounded TN and TT systems and non-corner grounded IT systems.
2. For corner-grounded TN, TT and IT systems.
Materials
• PC/ABS 3 mm, color NCS 1502-Y (RAL 9002 / PMS 1C Cool Grey)
and RAL 9017
• PC+10% GF 3.0 mm, Color RAL 9017 (in frames R1 to R3 only)
• Plastic parts are made of UV resistant f1 classified plastics
• hot-dip zinc coated steel sheet 1.5 to 2.5 mm, thickness of coating 100
micrometers, color NCS 1502-Y
Drive enclosure
Plywood and cardboard. Foam cushions PP-E, bands PP.Package
The main parts of the drive can be recycled to preserve natural resources
and energy. Product parts and materials should be dismantled and sep-
arated.
Disposal
Generally all metals, such as steel, aluminum, copper and its alloys, and
precious metals can be recycled as material. Plastics, rubber, cardboard
and other packaging material can be used in energy recovery. Printed
circuit boards and large electrolytic capacitors need selective treatment
according to IEC 62635 guidelines. To aid recycling, plastic parts are
marked with an appropriate identification code.
Contact your local ABB distributor for further information on environmental
aspects and recycling instructions for professional recyclers. End of life
treatment must follow international and local regulations.
Technical data 235
To Next Page
Loading...
