There is enough free space above the drive (200 mm [7.87 in.]) and below the drive
(300 mm [11.81 in.]) when measured from the drive base without the cable box) for
cooling air flow, service and maintenance. There is enough free space in front of the
drive for operation, service and maintenance.
Required tools
To install the drive mechanically, you need the following tools:
• drill with suitable bits
• screwdriver set (Torx, flat and/or Phillips, as appropriate)
• socket set (metric)
• tape measure, if you will not be using the provided mounting template.
Moving the drive
Move the transport package by pallet truck to the installation site.
Unpacking and examining the delivery
Examine that all items are present in the drive package and there are no signs of damage.
Read the data on the type designation label of the drive to make sure that the drive is
of the correct type.
Mechanical installation 43
To Next Page
Loading...
