ABB ACS880-04 - Page 331

Technical data 331
Ambient conditions
The unit is to be used in a heated indoor controlled environment.
Operation Storage Transportation
Altitude above sea level 0…4000 m (0…13123 ft).
Output derated above
1000 m (3281 ft). See
section Altitude derating
(page 315).
--
Temperature 0…+40 °C
(+32 …+104 °F), no
condensation allowed
-40…+70 °C
(-40 … +158 °F)
-40…+70 °C
(-40 … +158 °F)
+40…+50 °C (+104…+122 °F) derating 1% /1 °C (+1.8 °F) above 40 °C
(+104 °F). For more information, see Ambient temperature derating on page 315.
Relative humidity Maximum 95%, no
condensation allowed
Maximum 95%, no
condensation allowed
Maximum 95%, no
condensation allowed
Vibration
IEC/EN 61800-5-1
IEC 60068-2-6:2007,
EN 60068-2-6:2008
Environmental testing Part
2: Tests -Test Fc: Vibration
sinusoidal
IEC/EN 60721-3-3:2002
10…57 Hz: max.
0.075 mm amplitude
57…150 Hz: 1 g
Tested in ABB multidrive
cabinet (ACS880-x07)
according to:
Max. 1 mm (0.04 in.)
(5…13.2 Hz)
max. 0.7 g
(13.2…100 Hz) sinusoidal
IEC/EN 60721-3-1:1997
10…57 Hz: max.
0.075 mm amplitude
57…150 Hz: 1 g
IEC/EN 60721-3-2:1997
2…9 Hz: max. 3.5 mm
amplitude
9…200 Hz: 10 m/s
2
(32.8ft/s
2
)
Shock
IEC 60068-2-27:2008
EN 60068-2-27:2009
Environmental testing - Part
2-27: Tests - Test Ea and
guidance: Shock
Not allowed With packing max.
100 m/s
2
(330 ft./s
2
) 11 ms
With packing max.
100 m/s
2
(330 ft./s
2
) 11 ms
Contamination IEC/EN 60721-3-3:2002:
Classification of
environmental conditions -
Part 3-3: Classification of
groups of environmental
parameters and their
severities Stationary use
of weather protected
locations
IEC 60721-3-1 IEC 60721-3-2
Chemical gases: Class
3C2
Chemical gases: Class
1C2
Chemical gases: Class
2C2
Solid particles: Class 3S1
with IP20/21, 3S2 with
higher IP class
Solid particles: Class 1S3
(packing must support this,
otherwise 1S2)
Solid particles: Class 2S2
No conductive dust
allowed.