332 Technical data
Materials
Module enclosure Hot-dip zinc coated steel sheet 1.5 … 3.0 mm (0.059 … 0.12 in), thickness of
coating 20 micrometers
Module coating Lexan 8B35 polycarbonate film, PMS 1C Cool Gray and PMS Process Black
Fire safety of materials
(IEC 60332-1)
Insulating materials & non-metallic items: Mostly self-extinctive
Package Plywood base, boxed in corrugated cardboard, PET straps.
A heavy-duty cardboard package consists of a two-piece cardboard hood and a
plywood pallet. The product is either screwed onto the pallet or wedged with
plywood supports to keep it in position inside the package. Protection against
conditions causing corrosion is achieved by wrapping the product in polyethylene
sheet. Alternatively VCI protection is used. Packaging is secured with plastic
straps.
Disposal The main parts of the drive can be recycled to preserve natural resources and
energy. Product parts and materials should be dismantled and separated.
Generally all metals, such as steel, aluminum, copper and its alloys, and
precious metals can be recycled as material. Plastics, rubber, cardboard and
other packaging material can be used in energy recovery. Printed circuit boards
and large electrolytic capacitors need selective treatment according to IEC
62635 guidelines. To aid recycling, plastic parts are marked with an appropriate
identification code.
Please contact your local ABB distributor for further information on
environmental aspects and recycling instructions for professional recyclers. End
of life treatment must follow international and local regulations.
To Next Page
Loading...
