ABB ACS880-17 - Layout of Power Cable Connection Terminals and Cable Entries

106 Electrical installation
 Layout of power cable connection terminals and cable entries
The layout of power cable connection terminals and cable entries of the standard drive is
shown below.
Note: You have to remove the “door” fan to get access to the cable terminals and entries
(see page 136).
Power connection terminals and cable entries of frame R11
1 Strain relief
2 Power cable entries. Conductive sleeve
under the grommet.
3 Control cable entry with EMI conductive
cushions.
4 PE terminal
5 Input power cable terminals L1, L2 and L3
6 Motor cable terminals U2, V2, W2
W2V2U2
L1 L2 L3
1
2
3
4
6
5