24 Introduction to the manual
Electrical installation gives instructions on wiring the drive.
Control unit of frame R11 contains the default I/O connection diagrams, descriptions of the
terminals and technical data for the control unit of the drive.
Installation checklist contains a list for checking the mechanical and electrical installation
of the drive.
Start-up describes the start-up procedure of the drive.
Fault tracing describes the fault tracing possibilities of the drive.
Maintenance contains preventive maintenance instructions.
Technical data contains the technical specifications of the drive, eg. the ratings, sizes and
technical requirements, provisions for fulfilling the requirements for CE and other
markings.
Dimensions contains example dimension drawings of the drive.
The Safe torque off function describes the Safe torque off function of the drive and gives
instructions on its implementation.
Related documents
See List of related manuals on the inside of the front cover.
Categorization by frame size and option code
Some instructions, technical data and dimension drawings which concern only certain
frame sizes are marked with the symbol of the frame size, for example R11. The frame
size is marked on the type designation label (see page 49).
The instructions, technical data and dimension drawings which only concern certain
optional selections are marked with option codes (such as +E205). The options included in
the drive can be identified from the option codes visible on the type designation label (see
page 49). The option selections are listed in section Type designation key (page 50).
To Next Page
Loading...
