Introduction to the manual 23
Introduction to the manual
Contents of this chapter
This chapter describes the manual. It contains a flowchart of steps in checking the
delivery, installing and starting up the drive. The flowchart refers to chapters/sections in
this manual and to other manuals.
Target audience
This manual is intended for people who plan the installation, install, start up, use and
service the drive. Read the manual before working on the drive. You are expected to know
the fundamentals of electricity, wiring, electrical components and electrical schematic
symbols.
The manual is written for readers worldwide. Both SI and imperial units are shown.
Contents of the manual
This manual contains the instructions and information for the basic drive configuration. The
chapters of the manual are briefly described below.
Safety instructions gives safety instructions for the installation, start-up, operation and
maintenance of the drive.
Introduction to the manual gives and introduction to this manual.
Operation principle and hardware description describes the operation principle and
construction of the drive.
Mechanical installation describes how to install the drive mechanically.
Guidelines for planning the electrical installation contains instructions for the motor and
cable selection, protections and cable routing.
To Next Page
Loading...
