Guidelines for planning the electrical installation 69
Guidelines for planning the
electrical installation
Contents of this chapter
This chapter contains instructions for planning the electrical installation of the drive. Some
instructions are mandatory to follow in every installation, others provide useful information
that only concerns certain applications.
Limitation of liability
The installation must always be designed and made according to applicable local laws and
regulations. ABB does not assume any liability whatsoever for any installation which
breaches the local laws and/or other regulations. Furthermore, if the recommendations
given by ABB are not followed, the drive may experience problems that the warranty does
not cover.
Selecting the supply disconnecting device
The drive is equipped with a main disconnecting device. The disconnecting device can be
locked to the open position for installation and maintenance work.
Examining the compatibility of the motor and drive
Use an asynchronous AC induction motor, permanent magnet synchronous motor, AC
induction servomotor or ABB synchronous reluctance (SynRM) motor with the drive.
Several induction motors can be connected to the drive at a time.
To Next Page
Loading...
