Mechanical installation 57
Moving and unpacking the drive
Move the drive in its original packaging to the installation site as shown below to avoid
damaging the cabinet surfaces and door devices. When you are using a pallet truck, check
its load capacity before you move the drive.
The drive cabinet is to be moved in the upright position.
The center of gravity of the cabinet is high. Be therefore careful when moving the unit.
Avoid tilting.
Moving the drive in its packaging
A Lifting the transport package with slings.
1 Lifting points
B Lifting the transport package with forklift
A
B
1
R11:1450 mm (57.09 in)
2321 mm (91.38 in)
To Next Page
Loading...
