42/24-10 EN Rev. 9 Chapter 7: Gas Analyzer Configuration 7-C-1
Section C System Functions
Setting the Time Zone, Date and Time
Menu Path MENU → Configure → System → Date/Time
Parameter Explanation
Time zone The time zone can be selected either from the GMT (Greenwich
Mean Time) values or from the continent/country /city list.
Date Date must be entered in month/day/year format.
Enter year with 4 digits.
Procedure
Time Time must be entered in hour:minute:second format.
Enter seconds, too.
Daylight Savings Time The gas analyzer is automatically set to daylight savings time.
Note: This applies only when the time zone has been selected from the continent/
country /city list and not from the GMT values list.
Factory Setting The gas analyzer is factory-set to the GMT+1 time zone.
Accept the
Time Settings
Press the softkey SET TIME to accept the modified time settings.
To Next Page
Loading...
