7-C-4 Chapter 7: Gas Analyzer Configuration 42/24-10 EN Rev. 9
Inhibit Operation
Menu Path
MENU → Configure → System → Change password
Inhibit Operation Operation of the gas analyzer, i.e. entering the main menu and thus switching to
the menu mode, can be password protected.
After inhibition the gas analyzer can only be operated when the level 1 password
has been entered.
The level 3 password must be entered to configure the password protection.
Procedure Press the MENU ACCESS softkey in the “Change password” menu item and set
the password protection.
To Next Page
Loading...
