ControlMaster CM10, CM30 and CM50
Universal process controllers,
1
/8,
1
/4 and
1
/2 DIN 7 Advanced Level
100 IM/CM/S–EN Rev. R
7.10 Device Info
Used to display read-only factory-set parameters for the controller.
Instrument Type The controller’s model number (for example, CM30).
I/O Build The input / output (I/O) configuration.
No. Analog Inputs The number of analog inputs available.
No. Analog Outputs The number of analog outputs available.
No. Relays The number of relays available.
No. Digital I/O The number of digital inputs/outputs available.
Functionality The current functional setting of the controller (for example, Dual Loop).
Serial No. The factory serial number.
Hardware Revision The controller’s hardware version number.
Software Revision The controller’s software version number.