ControlMaster CM10, CM30 and CM50
Universal process controllers,
1
/8,
1
/4 and
1
/2 DIN 5 Operator Level Menus
22 IM/CM/S–EN Rev. R
5 Operator Level Menus
Operator level menus are used to adjust setpoint(s) and output(s), select setpoints,
select the view and to enter Basic and Advanced modes (via the Access level).
To access Operator Level menus:
1. From the Operator Page, press to view the available menus.
2. Use the / keys to scroll through the menus and menu options.
3. Press to expand menu levels and to select menu options or press to
return to the previous menu.
Menu functions are described in Table 5.1.
To Next Page
Loading...
Need help?
General
