ControlMaster CM10, CM30 and CM50
Universal process controllers,
1
/8,
1
/4 and
1
/2 DIN 7 Advanced Level
IM/CM/S–EN Rev. R 79
…Profile Parameters / …Enter Program / …Enter Segments
Guaranteed Ramp
Guaranteed Soak
Select how the Guaranteed Ramp/Soak feature will be applied to the segment.
None Guaranteed Ramp/Soak is disabled for the segment.
High Guaranteed Ramp/Soak is applied above the setpoint.
Low Guaranteed Ramp/soak applied below the setpoint.
High/Low Guaranteed Ramp/Soak is applied above and below the setpoint.
Note. Displayed only if Guaranteed Ramp/Soak is enabled in the Segment Options menu –
see page
75 for detailed explanation.
To Next Page
Loading...
