ControlMaster CM10, CM30 and CM50
Universal process controllers,
1
/8,
1
/4 and
1
/2 DIN 7 Advanced Level
86 IM/CM/S–EN Rev. R
…Functions / …Math Blocks
Multiplexer Setup
Source 1 Selects the source (any analog signal [see page 117] or user-defined constant) for the first input
into the multiplexer.
Source 1 Constant Sets the constant value to be used.
Note. Applicable only if Source 1 is assigned to one of the constants
Source 2 Select the source for the second input into the multiplexer.
Source 2 Constant Sets the constant value to be used.
Note. Applicable only if Source 1 is assigned to one of the constants
Mux Selector Select the digital signal to be used to switch between the 2 multiplexer inputs.
'0' selects first input (Mux A Src); '1' selects second input (Mux B Src).
Square Root Setup
Source 1 Selects the source of the parameter that requires a square root to be applied – see page
Appendix A, page 116 for description of sources.
To Next Page
Loading...
