Parameterization
OI/FEX300/FEX500-EN FEX300, FEX500 125
Menu / Parameter Value range Description
Totalizer / Batching (continued)
1)
Batch Tot. Display only
Once a fill operation has been started, the quantity
already filled in is shown here.
The totalizer restarts with zero for each fill operation
started and then totalizes the quantity up to the set fill
quantity.
Total Batch Counter Display only Total number of fill operations.
Reset Batch Counter
Reset fill operation totalizer to zero.
Start/Stop Batching
Manual start / stop of the fill operation.
Alternatively, the digital input can be configured for
starting / stopping the fill operation.
Totalizer / Edit Vol. Totals
Edit Totalizer Fwd -
Edit Totalizer Rev -
Edit Totalizer Net -
Enter totalizer statuses (e.g., when replacing the
transmitter).
italics = Parameter can only be viewed at the "Advanced" password level.
1) Parameter / menu only available for FEP500 / FEH500.
To Next Page
Loading...
