4 Repair
4.4.6. Measuring the play, axis 5
3HAC022032-001 Revision: E156
© Copyright 2004-2008 ABB. All rights reserved.
6. Apply load F in the opposite direction, as
shown in the figure to the right.
xx0300000187
Values for robot version IRB 4400/
45, /60, /L30, /S and IRB 4450S:
• A: Measuring tool, play
• B: 100mm
• C: 140mm
• F: 200N
Values for robot version IRB 4400/
L10:
• A: Measuring tool, play
• B: 140mm
•C: 85mm
• F: 40N
7. Remove the load and measure the play by
reading the dial indicator.
The maximum play allowed at the
given distance from the center of
axis 5 is, for robot version
• IRB 4400/45, /60, /L30, /S
and IRB 4450S: 0.20mm
• IRB 4400/L10: 0.08mm.
Action Info/Illustration
Continued
To Next Page
Loading...
