6 Reference information
6.8. Special tools
273 3HAC022032-001 Revision: E
© Copyright 2004-2008 ABB. All rights reserved.
Mounting tool, bearing race and sealing, upper arm
The tool for fitting the bearing race and sealing to the upper arm is assembled with the parts
shown in the figure below (included in the toolkit for service).
Note! The parts cannot be ordered separately, but are included in the complete toolkit! The
article numbers are given only for identification.
xx0500002582
Dismounting tool, bearing race, upper arm
The tool for removing the bearing race from the upper arm is assembled with the parts shown
in the figure below (included in the toolkit for service).
Note! The parts cannot be ordered separately, but are included in the complete toolkit! The
article numbers are given only for identification.
xx0600002656
A Hydraulic cylinder, 3HAC11731-1
B Press washer, 3HAC023963-007
C Hex socket head cap screw, 9ADA183-25, 2 pcs, M6 x 25
E Nut, 3HAC5507-1
I Connection rod, 3HAC025192-006
L Press head, 3HAC023963-039
N Press sleeve, 3HAC023963-015
A Hydraulic cylinder, 3HAC11731-1
B Press washer, 3HAC023963-007
Continued
Continues on next page
To Next Page
Loading...
