6 Reference information
6.8. Special tools
279 3HAC022032-001 Revision: E
© Copyright 2004-2008 ABB. All rights reserved.
Special tools
The table below specifies the special tools required during several of the service procedures.
The tools may be ordered separately and are also specified directly in concerned instructions
in the Product manual, procedures.
Description Qty Article no.
Lower arm fixture 3HAC 7035-1
Pressing, link 3HAC 023081-001
Pressing, outer ring on link 3HAC 023079-001
Pressing, innerring (nållager) 3HAC 023112-008
KM-socket for link 3HAC 5347-1
Pinion crank 3HAC 023132-001
Pressing, lower arm/balancing weight 3HAC 023092-001
Pressing, upper arm 3HAC 023084-001
Pressing, tie rod 3HAC 5021-1
Pressing, tilt house 3HAC 023080-001
Pressing, outer ring, tilt house 3HAC 023075-001
Support shaft 3HAC 5275-1
Support shaft 3HAC 5276-1
Support shaft/bearing race 3HAC 5281-1
Axis 1 pinion 3HAC 022436-001
Tool for lubrication 3HAC 5222-1
Oil exchange equipment 3HAC 021745-001
Adapter for shaft axis 3 3HAC 023916-001
Continued
To Next Page
Loading...
