ABB IRB 6620 - Page 113

2 DressPack and SpotPack
2.9.1 Options
3HAC 025861-001 Rev.E 111
Option 458-1, CP/CS, Proc 1 axis 3
R2. CP/CS and Proc 1 on axis 3
This option offers a kit with connectors. This must be assembled by the customer.
The kit contains:
• 1 Hose fittings (Parker Pushlock, (½”, M22x1,5 Brass, 24 degree seal))
• Connector with:
Option 452-1, Weld, Proc 1-3 axis 6
Weld and Proc 1-3 axis 6 on manipulator side
The process cable package from robot base to axis 6 (option 781-1) ends with free
end for media and for weld power cable. The option 452-1 offers a kit for connectors.
This must be assembled by the customer when hoses and power cable has been cut
to required length. The kit contains:
• 3 Hose fittings (Parker Pushlock, (½”, M22x1,5 Brass, 24 degree seal))
• 1 Multi contact connector (Female) type including:
1 pcs Hood Foundry (Harting) HAN EMC / M 40
1 pcs Hinged frame (Harting) Shell size 16
2 pcs Multicontact, male (Harting) Type HD (25 pin)
1 pcs Multicontact, male (Harting) Type EE (8 pin)
1 pcs Multicontact, male (Harting) Type DD (12 pin)
10 pcs Male crimp contacts For 1,5 mm
2
10 pcs Male crimp contacts For 0,5 mm
2
10 pcs Male crimp contacts For 1,0 mm
2
10 pcs Male crimp contacts For 2,5 mm
2
12 pcs Male crimp contacts For 0,14 – 0,37 mm
2
45 pin For 0,2 – 0,56 mm
2
Assembly Accessories to complete connector
Assembly instruction
1 pc Welding connector socket incl. housing 3x35 mm
2
(35 mm
2
socket)
1 pc Cable gland
1 pc End housing
Assembly Accessories to complete connector
Assembly instruction