2 DressPack and SpotPack
2.4.2 Configuration result for Type Se
3HAC 025861-001 Rev.E 75
Required Water and Air unit options
The SpotPack IRB 6620 also requires Water and Air unit options to perform as
intended. These options are further described under chapter 2.7 Water and Air unit
and are also mentioned in this chapter.
Figure 50 Water and Air unit overview.
791-4 Weld power cable, 7 m Offers floor cable of 7 m length for weld power.
Only together with option 781-2.
791-5 Weld power cable, 15 m Offers floor cable of 7 m length for weld power.
Only together with option 781-2.
Option Type Description
Option Type Description
792-1 Water and Air unit,
type S(e)
Offers the basic water and air unit for type S and Se
including splitbox for signal distribution.
797-1 Cable to split box, 7 m Offers floor cable of 7 m length for signals between
the Spot Welding cabinet and to the split box placed
on the water and air unit.
797-2 Cable to split box, 15 m Offers floor cable of 15 m length for signals between
the Spot Welding cabinet and to the split box placed
on the water and air unit.
797-3 Cable to split box, 22 m Offers floor cable of 22 m length for signals between
the Spot Welding cabinet and to the split box placed
on the water and air unit.
797-4 Cable to split box, 30 m Offers floor cable of 30 m length for signals between
the Spot Welding cabinet and to the split box placed
on the water and air unit.
To Next Page
Loading...
