NoteAction
xx1400002188
Fit the attachment screws and washers
now accessible.
13
Attachment screws: M12x90 12.9 Gleitmo
(30 pcs).
Remove the lifting accessory.14
Remove the guide pins and fit the remain-
ing attachment screws and washers.
15
Tightening torque: 120 Nm.Secure the gearbox with its attachment
screws.
16
i
IRB 6700 - 235/2.65, IRB 6700 - 205/2.80, IRB 6700 - 175/3.05, IRB 6700 - 150/3.20
ii
IRB 6700 - 200/2.60, IRB 6700 - 155/2.85, IRB 6700 - 300/2.70, IRB 6700 - 245/3.00
Preparations prior to refitting motor
NoteAction
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
1
Remove any old paint residues or other contam-
ination from the contact surfaces on both the
motor and the mating parts.
2
Wipe clean the contact surfaces and the o-ring
groove.
Continues on next page
Product manual - IRB 6700 687
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
4 Repair
4.8.3 Replacing the axis-2 gearbox (IRB 6700 - 235/2.65, IRB 6700 - 205/2.80, IRB 6700 - 175/3.05, IRB
6700 - 150/3.20, IRB 6700 - 200/2.60, IRB 6700 - 155/2.85)
Continued
To Next Page
Loading...
