ABB IRB 6700 Series - Installing the Motor Cooling Fan (Option)

2.7.2 Installing the motor cooling fan (option)
Location of the axis-1 motor cooling fan
A cooling fan can be installed on the axis-1 motor as an option. The fan is not
possible to install on a robot with protection type Foundry Plus.
xx1800000156
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest revision of Product manual, spare parts - IRB 6700/IRB 6700Inv on ABB
Library.
NoteArticle numberSpare part
Only available for the axis-1 motor.
Can not be used together with protec-
tion type Foundry Plus.
Includes fan unit, fan cable harness,
customer connection plate and re-
quired fasteners.
3HAC051149-001Fan unit set
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section Stand-
ard toolkit on page 829.
-Standard toolkit
Continues on next page
Product manual - IRB 6700 103
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
2 Installation and commissioning
2.7.2 Installing the motor cooling fan (option)