ABB IRB 6700 Series - Securing the Robot with a Transport Support

2.3.2 Securing the robot with a transport support
General
This section describes how to fit the transport support to the robot in order to
secure the robot for transportation. The transport support is required if the robot
must be transported with mounted tools.
DANGER
Releasing the brakes is a hazardous action that may cause injury and damage
property. It must be done with great care and only when absolutely necessary.
Fitting the transport support
Illustration for fitting the transport support
A
B
xx0800000062
Continues on next page
Product manual - IRB 6700 65
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
2 Installation and commissioning
2.3.2 Securing the robot with a transport support