2 Installation and commissioning
2.6.5. Installation of position switches (option)
1253HAC022033-001 Revision: K
© Copyright 2004-2011 ABB. All rights reserved.
Axis 3
The illustration below shows the position switch for axis 3. In addition to the shown
components, cabling must also be installed from the switch to the robot base.
xx0100000160
Specifications
Maximum voltage/current for the position switches:
A Position switch, axis 3
B Cam
C Set screw, cam (cam stop)
E Rail
F Rail attachment
Parameter Value
Voltage Max. 50 VDC
Current Max. 1 A
Continued
Continues on next page
To Next Page
Loading...
