7 Reference information
7.5. Weight specifications
3HAC022033-001 Revision: K426
© Copyright 2004-2011 ABB. All rights reserved.
7.5. Weight specifications
Definition
In installation, repair, and maintenance procedures, weights of the components handled are
sometimes specified. All components exceeding 22 kg (50 lbs) are highlighted in this way.
To avoid injury, ABB recommends the use of a lifting accessory when handling components
with a weight exceeding 22 kg. A wide range of lifting accessories and devices are available
for each manipulator model.
Example
Following is an example of a weight specification in a procedure:
Action Note
CAUTION!
The motor weighs 32 kg! All lifting accessories used
must be sized accordingly!
To Next Page
Loading...
