3 Maintenance
3.3.1. Inspection, oil level gearbox axis 1
3HAC022033-001 Revision: K150
© Copyright 2004-2011 ABB. All rights reserved.
3.3 Inspection activities
3.3.1. Inspection, oil level gearbox axis 1
Location of gearbox
The axis 1 gearbox is located between the frame and base as shown in the figure below.
xx0200000111
Required equipment
A Gearbox axis 1
B Oil plug, filling
C Motor, axis 1
D Oil plug, inspection (not available in all designs)
E Label, specifies type of oil in the axis 1 gearbox
Equipment, etc. Art. no. Note
Lubricating oil 3HAC032140-001 Kyodo Yushi TMO 150
NOTE! Do not mix with other oils!
Standard toolkit - Content is defined in section
Standard toolkit on page 427.
Other tools and procedures may be
required. See references to these
procedures in the step-by-step
instructions below.
These procedures include
references to the tools required.
Continues on next page
To Next Page
Loading...
