ABB M2000 - Rinsing Gearbox; Equipment

3 Maintenance
3.4.1. Type of oil
3HAC022033-001 Revision: K198
© Copyright 2004-2011 ABB. All rights reserved.
Rinsing gearbox
Depending on which types of oil are mixed and which type of oil shall be filled in the gearbox
after rinsing, use the appropriate procedure.
The same applies if the type of oil shall be changed in the gearbox.
NOTE!
The explanation given for Kyodo Yushi TMO 150 also applies to Shell Tivela S 150.
The explanation given for Mobilgear 600 XP320 also applies to Mobil Gearlube X320.
Kyodo Yushi TMO 150 mixed with Optimol Optigear RMO 150/Optigear RO 150
Use this procedure to rinse the contaminated gearbox if the oil types Kyodo Yushi TMO 150
and Optimol Optigear RMO 150/Optigear RO 150 are mixed.
• Flush the gearbox properly three times with the correct type of oil. Use a service
program when flushing.
• Refill the gearbox with the correct type of oil.
Kyodo Yushi TMO 150 mixed with Mobilgear 600 XP320
Use this procedure to rinse the contaminated gearbox if the gearbox shall contain Kyodo
Yushi TMO 150 and it is mixed with Mobilgear 600 XP320.
• Flush the gearbox properly three times with Kyodo Yushi TMO 150. Use a service
program when flushing.
• Refill the gearbox with Kyodo Yushi TMO 150.
Equipment
Equipment Art. no. Note
Label set See Spare Parts. Includes small labels for each gearbox
and the complete label to be fitted at
the robot base.
NOTE! Correct labels must be fitted to
the robot in case of changing oil types.
Oil change equipment 3HAC021745-001 Includes pump with outlet pipe.
Continued
工控帮助教小舒QQ2823408167
长沙工控帮教育科技有限公司