ABB M2000 - Inspection, Oil Level Gearbox Axis 3

3 Maintenance
3.3.3. Inspection, oil level gearbox axis 3
3HAC022033-001 Revision: K156
© Copyright 2004-2011 ABB. All rights reserved.
3.3.3. Inspection, oil level gearbox axis 3
Location of gearbox
The axis 3 gearbox is located in the upper arm rotational center as shown in the figure below.
xx0200000113
Required equipment
A Gearbox, axis 3
B Oil plug, filling
C Oil plug, draining
D Label, specifies the oil type of axis 3 gearbox
Equipment Art. no. Note
Lubricating oil 3HAC032140-001 Kyodo Yushi TMO 150
NOTE! Do not mix with other oils!
Standard toolkit - Content is defined in section
Standard toolkit on page 427.
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
These procedures include
references to the tools required.
Continues on next page
工控帮助教小舒QQ2823408167
长沙工控帮教育科技有限公司