ABB M2000 - Page 149

3 Maintenance
3.2.2. Maintenance schedule
1473HAC022033-001 Revision: K
© Copyright 2004-2011 ABB. All rights reserved.
Inspection
Replacement
Cable harness Every:
• 6 months
If required
7)
Inspection, cable harness
on page 174.
Replacement of cable
harness, axes 1-4 on page
251
Replacement of cable
harness, axes 5-6 on page
260
Inspection Air hoses Every:
• 6 months
Inspection of air hoses
(Foundry Prime) on page
191
Inspection Balancing device Every:
• 6 months
• Inspection,
balancing device
on page 168
Inspection Information labels Every:
• 12 months
• Inspection,
information labels
on page 187
Inspection Dampers Every:
• 12 months
• Inspection, damper
axes 2-5 on page
181
Inspection Mechanical stop, axis 1 Every:
• 12 months
• Inspecting,
mechanical stop
pin, axis 1 on page
177
• Inspection,
mechanical stop,
axes 1, 2 and 3 on
page 179
Analysis Oil gearbox axis 6 Every:
• 3,000h or 6
months
2)
Inspection, oil level
gearbox axis 6
Changing Axis 1 gearbox, oil:
Kyodo Yushi TMO 150
Every:
• 6,000 hours
Oil change, gearbox axis 1
Changing Axis 2 gearbox, oil:
Kyodo Yushi TMO 150
Every:
• 6,000 hours
Oil change, gearbox axis 2
on page 203
Changing Axis 3 gearbox, oil:
Kyodo Yushi TMO 150
Every:
• 6,000 hours
Oil change, gearbox, axis
3 on page 206
Changing Axis 4 (primary and
secondary) gearbox, oil:
Kyodo Yushi TMO 150
Every:
• 6,000 hours
Oil change, gearbox, axis
4 on page 209
Changing Axis 5 (primary and
secondary) gearbox, oil:
Kyodo Yushi TMO 150
Every:
• 6,000 hours
Oil change, gearbox, axis
5 on page 212
Changing Axis 6 gearbox, oil:
Kyodo Yushi TMO 150
Every:
• 3,000 hours
or 6 months
1)
Oil change, gearbox axis 6
Replacement SMB Battery pack Battery low alert
3)
• Replacing SMB
battery on page
218
Maintenance
activity
Equipment Interval Detailed in section
Continued
Continues on next page
工控帮助教小舒QQ2823408167
长沙工控帮教育科技有限公司